Rolling the driver back to an older version may correct the issue. The cutter driver – it is possible that the cutter USB driver that was installed could be conflicting with Windows. If it does, remember to change the port in the VE LXI Production Manager to match.Ģ. If you change any part of your cabling, check the Windows Device Manager to insure that Windows does not change the port number assigned to the USB Serial Port. Also, on a desktop computer, the USB ports on the front of the tower are essentially a built in hub and should be avoided for attaching equipment. Additionally, the cable must be plugged directly between the cutter and the computer no extension or hub should be used. The cable connection – Due the the limited memory of the R-Series model cutters, using a cable beyond 5 to 6 feet in length is not recommended. There are several things that can affect the communication between the computer and the R-Series cutter:ġ.
0 Comments
Leave a Reply. |